What is SponsiTrak

Aluvan is responsible for one of the most revolutionary designs to be used into the plate boat industry. With over 30 years in the marine industry and hours of careful design and rendering, designer Terry Allen developed the SponsiTrak Hull.

The SponsiTrak Hull is an original plate alloy design, offering a handling and ride that is remarkably smooth and stable at both rest and whilst on the move. It delivers a sharp entry and deadrise which can normally pose a hazard to a boat due to the amount of roll that the boat may have, however due to the rollover chines which then conform with the side sheet create a sponson like design which aides in stability at rest whilst due to the rollover chine ensures the passengers stay remarkably dry.

This very same sponson design allows the boat to plane quicker and with less surface friction due to the added planing areas. However that is not all this design has to offer the two chutes that are created by this design draw an area of air under the hull and enables the hull to lift out of the water so that very little of the chines and keel still remain. This effect creates a skimming effect, coupled with a long waterline makes short work of any chop.

Due to the boat riding on both the keel and the chines this makes the boat track straighter through swell and waves, reducing the chance of any unwelcome turning and rolling in large swell.

What is really impressive about this hull is its ability to turn tight corners and despite this design the boat will still behave as a normal monohull and lean into the corner rather than out, which is a known problem with other multi hull designs.

It is clear to see why the SponsiTrak is a superior hull in today's recreational boating, we look forward to you experiencing this technology for yourself.